Davenport
Machine, Inc.
A Brinkman International Group, Inc. Company
167
Ames Street
Rochester, NY 14611
phone: 800.344.5748
fax: 585.235.6568
E-3154-SA Holder Image
E-3154-SA Assembly Image
The capacity of this
sizing tool holder is up to 7/8" diameter by 1
1/2" wide. It uses a group #2 American Standard
Dovetail Blank. The tool is lifted to the work piece by a
3/4" diameter roll mounted in a dovetailed slide
which floats vertically and is adjustable foe pretravel.
The roll also is adjustable to obtain part size.
This tool holder can be used in all five cross working
positions with a series of mounting blocks through which
coolant is supplied directly to the tool's cutting edge.
1st Position Cross Slide use E-3264-3-SA
2nd Position Cross Slide use E-3154-8-SA
3rd Position Swing Arm use E-3154-8-SA with 5080-64-31
Swing Arm
3rd and 4th Position Adjustable Cross Slide use
E-3154-18-SA
5th Position Swing Arm use E-3154-8-SA with 459-10 Swing
Arm
Part
#
Name
834-A-11-8
Allen
cap screw (2)
836-A-6-4
Allen
set screw
836-A-11-16
Allen
set screw
836-A-14-8
Allen
set screw
836-B-11-8
Allen
button screw (5)
1263-93
Cone
point set screw(2)
3154-1
Size tool body
3154-2
Dovetail mount
3154-3
Dovetail segment
3154-4
Stationary tool
clamp segment
3154-5
Tool clamp
3154-6
Roll
block
3154-7
Clamping stud (2)
3154-9
Roll adjusting
screw
3154-12
Spring
3154-15
Dog screw
3154-17
Roll pin
Oversize/Regular Capacity
Motorized Bijur System
75, 60, or 45 Cycle
10 Hp Main Drive Motor
Barrel Chucking...(more)
Support the Original Equipment Manufacturer
Buy O.E.M.
parts direct or from your nearest Authorized
Davenport Distributor.
Help us keep all 18,000 parts in stock for you, not just some.
