| 
5133-R Revolving Head Repair Gear  Print
Article...
In response to several recent inquiries Davenport Machine has begun
production on part number 5133-R Revolving Head Repair Gear that
will eliminate the need for additional machining after the gear has
been installed on the revolving head.
The 5133-R gear was designed
and machined to fit slightly below the rear surface of the head
(providing the head has NOT been refaced after it was originally
manufactured). The Geneva Motion Star Wheel will have to be requalified to insure
proper indexing of the revolving head.
The 5133-R gear can be used
for field repairs when facing off the back of the 5133 Revolving
Head Gear and revolving head is not feasible. Any one that has had
to replace a 5133 Revolving Head Gear in the past knows how difficult
it can be to turn the extra material off the gear if you do not
have: 1. A good lathe.
2. The proper fixturing.
3. A good tool maker with extra time.
Contact Bob Kruse at Davenport if you have any questions.
|
